A LoRaWAN temperature sensor is only as good as its location. Even an accurate, calibrated sensor will send misleading readings if it sits above a radiator, in direct sun or behind a cupboard. For building managers, facilities teams and installers, getting the installation right is what turns temperature readings into decisions you can trust. This practical guide explains where to install a LoRaWAN temperature sensor, which mistakes to avoid, how to send temperature readings to a building management system (BMS), and how the LoRaWAN temperature sensor VISTA FEEL fits into a connected building.
Temperature is one of the key indicators of how a building performs. Room by room temperature monitoring with a LoRaWAN sensor helps you:
LoRaWAN (Long Range Wide Area Network) is a wireless network protocol designed for the Internet of Things and maintained by the LoRa Alliance. A LoRaWAN temperature sensor runs on a battery, needs no cabling and sends small packets over long distances. A single LoRaWAN gateway can collect readings from many sensors across several floors. Several years of autonomy is typical, depending on the reporting frequency.
Compared with a wired temperature probe connected to a controller, a wireless LoRaWAN sensor is faster to install, easier to move, and does not require work on the building's electrical or IT network. This makes it well suited to existing buildings and occupied spaces.
The aim is simple: the sensor should measure the temperature that occupants actually experience, not the temperature of a wall, a window or a heat source. Follow these key rules.
Install the temperature sensor at the height of the occupied zone. In practice, many manufacturers and BMS installers recommend mounting room temperature sensors at around 1.5 m above finished floor level. Some guidance suggests 1.5 to 2 m, particularly in rooms heated by radiators. Avoid placing the sensor close to the ceiling, where warm air collects, or close to the floor, where it is cooler.
Mount the sensor on an internal wall rather than an external wall. An external wall is colder in winter and warmer in summer, and its surface temperature can affect the measurement. Also check that there is no hot water pipe or heating pipework inside the wall behind the sensor.
Keep the temperature sensor away from:
As Schneider Electric's building automation guidance puts it, a sensor should be exposed to the area it controls and not be directly influenced by heat sources such as computers.
The sensor needs to be in free air. Do not install it behind furniture, inside a cupboard, behind curtains or in a corner where air does not circulate. In large open spaces, one sensor is rarely enough: install one temperature sensor per zone with similar occupancy and exposure, for example one per side of the building or one per heating zone.
A LoRaWAN temperature sensor must also be placed where its signal can reach a gateway. Before the final installation, check coverage in each room: received signal strength and signal-to-noise ratio are usually visible on the network server or monitoring platform. Avoid installing the device inside a metal enclosure or directly against large metal surfaces, which can weaken the signal. In basements, plant rooms or long corridors, an additional receiver may be needed.
For cold rooms, plant rooms, pipes or tanks, a room sensor is not the right tool. Choose a LoRaWAN transmitter with an external temperature probe, and place the probe at the exact point to be measured. The probe lead should be long enough to keep the transmitter in a place with a good signal, while the probe itself stays in the measured environment. Follow the manufacturer's specification for the probe type, lead length and measurement range.
Most unreliable temperature readings come from a few common mistakes:
The manufacturer's installation instructions should always be followed: mounting method, minimum distances, configuration and typical operating conditions are part of the product specification.
Once the sensor is installed, temperature readings need to reach the people and systems that rely on them. A typical LoRaWAN architecture has four parts:
To integrate temperature readings with a building management system, there are several options:
Before you choose, confirm key points with your integrator: the message format and decoder, the BMS integration method, the reporting frequency and the number of points needed for each building. A clear integration strategy avoids surprises on the day of commissioning.
Use this checklist to prepare each installation day and save time on site.
Before the installation day
On the installation day
After the installation
Installation planning also depends on the price and lead time of the equipment. Compare the price per monitored point, including sensors, receivers and platform, and ask the manufacturer for the typical lead time and stock availability before you fix the installation date. A short lead time makes it easier to equip buildings before the heating season. Review each product specification too: operating range, typical battery life and radio specification. For VISTA FEEL, the price is shown in the Nexelec online store.
To apply these installation rules easily, Nexelec offers VISTA FEEL, a 2-in-1 LoRaWAN temperature and humidity sensor designed for offices, schools, hotels and residential buildings, and for Internet of Things projects of any size.
The older FEEL room sensor is still available, and you can compare both in the Nexelec range of temperature and humidity sensors. To control heating room by room, combine temperature readings with LoRaWAN thermostatic heads; to monitor ventilation, add an indoor air quality sensor.
What is a LoRaWAN temperature sensor? It is a wireless Internet of Things (IoT) device that measures room temperature and sends its data over a LoRaWAN radio network to a gateway. Battery-powered sensors are one of the simplest connected things to add to an existing building, and they support temperature monitoring without cabling.
At what height should a LoRaWAN temperature sensor be installed? At the height of the occupied zone, typically around 1.5 m above floor level, on an internal wall, away from heat sources, windows and direct sun.
How many temperature sensors does a building need? At least one per zone with similar occupancy and exposure. Large open spaces, rooms facing different directions and separate heating zones each need their own sensor.
Can a LoRaWAN temperature sensor be connected to a BMS? Yes. Readings can be converted into BACnet/IP points through a gateway such as MASTER PRO, or sent from a platform such as NAVIXIS through an API.
How often should a LoRaWAN temperature sensor send readings? It depends on your needs. A reporting interval of several minutes is usually enough for comfort monitoring; more frequent messages reduce battery life.
Reliable temperature readings start with the right installation: the correct height, an internal wall, distance from heat sources and good network coverage. Combined with a clear integration strategy, a LoRaWAN temperature sensor becomes a dependable tool for comfort, energy and compliance. To equip your buildings, discover the LoRaWAN temperature sensor VISTA FEEL, check its price in the Nexelec online store or request a quote.